Difference between revisions of "模板:FT232RL USB TTL 使用说明"

From Diustou Wiki
(Created page with "1. 下载并安装驱动。 400px 400px File:FT232RL_...")
 
 
Line 1: Line 1:
−
1. 下载并安装[[:File:CDM21228_Setup.zip|驱动]]。
+
1. Download and install the [https://wiki.diustou.com/cn/%E6%96%87%E4%BB%B6:CDM21228_Setup.zip Diver]。
  
 
[[File:FT232RL_USB_TTL_使用说明_1.png|400px]]
 
[[File:FT232RL_USB_TTL_使用说明_1.png|400px]]
Line 9: Line 9:
 
[[File:FT232RL_USB_TTL_使用说明_4.png|400px]]
 
[[File:FT232RL_USB_TTL_使用说明_4.png|400px]]
  
−
2. 验证驱动是否安装成功。右键点击左下角的 Windows 徽标，打开“设备管理器”。
+
2. Verify if the driver is installed successfully. Right-click the Windows logo in the bottom left corner and open "Device Manager".
  
 
[[File:FT232RL_USB_TTL_使用说明_5.png|400px]]
 
[[File:FT232RL_USB_TTL_使用说明_5.png|400px]]
  
−
展开“端口 (COM 和 LPT)”，如有“USB Serial Port”设备，即为安装成功。
+
Expand "Ports (COM & LPT)". If there is a "USB Serial Port" device, the installation is successful.
  
 
[[File:FT232RL_USB_TTL_使用说明_6.png|400px]]
 
[[File:FT232RL_USB_TTL_使用说明_6.png|400px]]
  
−
3. 验证模块是否正常工作。短接模块的 TXD 和 RXD 管脚，打开[[:File:sscom5.13.1.zip|串口调试软件]]，点击“打开串口”。文本框内填入任意内容，再点击“发送”按钮。正常情况下，软件会接收到相同的内容并显示出来。
+
3. Verify if the module is working properly. Short-circuit the TXD and RXD pins of the module, open the[https://wiki.diustou.com/cn/%E6%96%87%E4%BB%B6:Sscom5.13.1.zip serial port debugging software]， , and click "Open Serial Port". Enter any content in the text box, then click the "Send" button. Under normal circumstances, the software will receive and display the same content.
  
 
[[File:FT232RL_USB_TTL_使用说明_7.png|400px]]
 
[[File:FT232RL_USB_TTL_使用说明_7.png|400px]]

Latest revision as of 18:00, 13 January 2025

1. Download and install the Diver。

FT232RL USB TTL 使用说明 1.png

FT232RL USB TTL 使用说明 2.png

FT232RL USB TTL 使用说明 3.png

FT232RL USB TTL 使用说明 4.png

2. Verify if the driver is installed successfully. Right-click the Windows logo in the bottom left corner and open "Device Manager".

FT232RL USB TTL 使用说明 5.png

Expand "Ports (COM & LPT)". If there is a "USB Serial Port" device, the installation is successful.

FT232RL USB TTL 使用说明 6.png

3. Verify if the module is working properly. Short-circuit the TXD and RXD pins of the module, open theserial port debugging software， , and click "Open Serial Port". Enter any content in the text box, then click the "Send" button. Under normal circumstances, the software will receive and display the same content.

FT232RL USB TTL 使用说明 7.png

Retrieved from "https://wiki.diustou.com/en/index.php?title=模板:FT232RL_USB_TTL_使用说明&oldid=1593"