STLINK-V3MINI
|
STLINK-V3MINI
|
|
|
|
Information
|
|
|
Categories: ---
|
Brand: ST
|
|
|
|
Description
|
|
|
Features
|
---
|
Interfaces
|
---
|
|
|
|
|
Introduction
The STLINK-V3MINI is stand-alone debugging and programming mini probe for STM32 microcontrollers.
The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.
The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.
The STLINK-V3MINI is a portable version, easy-to-use debugger/programmer including STDC14 interface with its flat cable.
User guide
Supports devices
All products of STM32 series which has JTAG/SWD interface
Hardware connection
- Connect STLINK-V3MINI to host PC
- Connect micro USB interface of STLINK-V3MINI, generally, it driver will be auto installed by ST-Link tool.
- You can check the programmer is recognized by PC
- Sometimes, the driver may not be installed properly, you can also install it manually.
- Download it from the #Resources
- Right-click ST-Link Debug, and ST-Link VCP Ctrl to update the driver.
- Connect the programmer to the target board
- Connect the STLINK-V3MINI to JTAG/SWD interface of STM32 board by adapter boards
Software setting
- Connect the programmer to the target board and power on it. If all the connections are normally, you can read the information of the target board
- Then you can compile and program target board by the STLINK-V3MINI
Resources
Support
|
Contact us
Working hours: 09:00-18:00 (UTC+8 Monday to Saturday)
|
|