Search results

The STLINK-V3MINI is stand-alone debugging and programming mini probe for STM32 microcontrollers. ...STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.

[[Category:mini PC| ]][[Category:Raspberry Pi| ]]

|categories=[[:Category:Mini PC|Jetson]]

...move USB SLAVE1/2/3/4 Select jumper caps. Connect USB SLAVE of IO Board to PC. Connect USB TO UART interface of IO Board to PC. Open Putty software on PC and set it to 115200.

* Supports popular mini PC such as Raspberry Pi, BB Black, Banana Pi. * Supports VGA input ([https://{{SERVERNAME}}/Mini-HDMI-Male-to-VGA-Female-Cable.htm specific cable] is required and should be

3. Connect the CP2102 to the USB port of your PC, and then open the Device Manager to see if the corresponding COM port can ...tal number of users: 0"), if the communication between the module and your PC is built up successfully. (In case of no information shown, please turn bac

#The users can build communication between the module and the PC via a USB-to-UART interface. It is recommended to use the matching USB-to-U {{FAQ|What is the MINI USB interface on the fingerprint reader used for?|

|platform=MCU/mini PC/FPGA...