礦ision Build Log
Project:
C:\Users\Administrator\Desktop\资料\Capacitive Touch Keypad (B) 资料\code\16 KEY\MDK_Project\Project.uvproj
Project File Date:  11/15/2014

Output:
Build target 'Target 1'
linking...
Program Size: Code=3828 RO-data=336 RW-data=52 ZI-data=1836  
FromELF: creating hex file...
".\Out\Project.axf" - 0 Error(s), 0 Warning(s).
Load "C:\\Users\\Administrator\\Desktop\\资料\\Capacitive Touch Keypad (B) 资料\\code\\16 KEY\\MDK_Project\\Out\\Project.axf" 
Set JLink Project File to "C:\Users\Administrator\Desktop\资料\Capacitive Touch Keypad (B) 资料\code\16 KEY\MDK_Project\JLinkSettings.ini"
* JLink Info: Device "STM32F103VE" selected (512 KB flash, 64 KB RAM).
 
JLink info:
------------
DLL: V4.80g, compiled Feb 13 2014 20:50:02
Firmware: J-Link ARM V8 compiled Nov 25 2013 19:20:08
Hardware: V8.00
S/N : 99999994 
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFULL 
 
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
ROMTableAddr = 0xE00FF003
 
Target info:
------------
Device: STM32F103VE
VTarget = 3.300V
State of Pins: 
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 8192
Watchpoints:          4
JTAG speed: 3000 kHz
 
Erase Done.
Programming Done.
Verify OK.
Application running ...