AVR 硬件操作库函数

来自丢石头百科
/*********************************************************************
 微 雪 电 子   WaveShare            
目    的:   建立AVR的硬件提取库,增加各类补丁,方便系统程序移植
目标系统:   基于AVR单片机                                                 
应用软件:   ICCAVR                                                      
版    本:   Version 1.0                                                       
圆版时间:   2005-06-25
开发人员:   SEE
说    明:   若用于商业用途,请保留此段文字或注明代码来源
  深 圳 市 微 雪 电 子 有 限 公 司 保 留 所 有 的 版 权     
*********************************************************************/
/*01010101010101010101010101010101010101010101010101010101010101010101
----------------------------------------------------------------------
版本更新记录:
----------------------------------------------------------------------
入口参数说明:
----------------------------------------------------------------------
待定参数说明:
---------------------------------------------------------------------- 
对外变量说明:

----------------------------------------------------------------------
对外程序说明:

----------------------------------------------------------------------
10101010101010101010101010101010101010101010101010101010101010101010*/
#ifndef Hardware_H
#define Hardware_H
#include <math.h>
#include <string.h>
#include <stdio.h>
#include <macros.h>
#include <eeprom.h>
//#include <wdt.h></wdt.h></eeprom.h></macros.h></stdio.h></string.h></math.h>
/* TWI configs */
//如使用ATMEGA162(没有TWI接口)之类的MCU,在加载Hardware.H前,务必加“#define NO_INCLUDE_I2C_H 1”语句
#if NO_INCLUDE_I2C_H
;
#else
#include "D:\ICC_H\I2C.H" //i2c即AVR的"twi"
#endif
/* hard configs */
#ifndef flash
#define flash const
#endif
#ifndef code
#define code const
#endif
#ifndef NOP
#define NOP() asm("nop")
#endif
/* io configs */
#define sbi(io,bit) ( io |= (1<<bit example:="" sbi="">#define cbi(io,bit) ( io &amp;= ~(1<<bit cbi="" example:="">#define gbi(pin ,bit) ( pin &amp; (1<<bit example:="" gbi="" p=""></bit></bit></bit>
/* interrupt configs */
#define DIS_INT asm("sei")
#define EN_INT asm("cli")
/* wdt configs */
#define WDT() asm("wdr")
/* bit operation */
//#ifndef BIT
//#define BIT(x) ( 1<<(x) )
//#endif
/* USART configs for 4 Mhz crystal */
//#define BAUD9600 25
//#define BAUD19000 12
//#define UART_TRAN_ON() UCR |= 0x08
//#define UART_TRAN_OFF() UCR &amp;= ~0x08
//#define UART_RCV_ON() UCR |= 0x10
//#define UART_RCV_OFF() UCR &amp;= ~0x10
/*--------------------------------------------------------------------
程序全称:50us 延时程序
程序功能:就是 50us延时
注意事项:基于7.3728M晶振,稍微有点误差
提示说明:调用delay50us(20),得到1ms延时
输 入: 
返 回:无 
--------------------------------------------------------------------*/
void delay50us(sint16 t)
{
uint8 j; 
for(;t>0;t--) 
for(j=0;j<70;j++) 
;
}
/*--------------------------------------------------------------------
程序全称:50ms 延时程序
程序功能:就是 50ms延时
注意事项:基于7.3728M晶振,稍微有点误差
提示说明:调用delay50ms(20),得到1s延时 
输 入:
返 回:无
--------------------------------------------------------------------*/
void delay50ms(sint16 t)
{
uint16 i; 
for(;t>0;t--)
for(i=0;i<52642;i++)
; 
}
#endif