Template:2inch-LCD-Module-Arduino-Guides
From Diustou Wiki
The examples are tested in Arduino UNO, if you want to use other versions of the Arduino, you need to change the connection according to the actual boards.
Hardware Connection
| LCD | UNO |
| VCC | 5V/3.3V |
| GND | GND |
| DIN | D11 |
| CLK | D13 |
| CS | D10 |
| DC | D7 |
| RST | D8 |
| BL | D9 |
Run the example
Download the demo codes and unzip it. The Arduino project is located in ~/Arduino/…
Run the project according to the actual display type
For examples: 1.54inch LCD Module. Enter the LCD_1inch54 directory and run the LCD_1inch54.ino file
Run the project and choose Arduino UNO as Board
Select the COM Port according to your Device Manager
Compile and download it to your board
