| Answer:
|
- Note that you cannot bend the IC part, only the display area can be bent(>60°). Area marked in red cannot be bent.
 
- The circuity area on the corners of e-Paper cannot be bent too much times, please be careful. Recommend you to use Vcacuum Pen or stick it by sticker when picking it up
- Please make sure there are not particulate matters on both sides of the e-paper panel. You can only bend the flexible e-paper forward and backward, but not in left and right direction.
- The flexible e-Paper is covered by hot melt film, the penal should not touch sharp objects, otherwise, it may be damaged
- The object temperature cannot reach 70°C, otherwise, e-Paper will be damaged
- If you want to test the bending of flexible e-Paper， you can make a fan-shaped mold whose central angle is 60°and radius is about 5cm
|
|
