Answer:
|
- The image provided may differ depending on batches, however, some Images are just available for Pi 2 (or before, but not for Pi 3). In such cases, you can download the latest version from Raspberry Pi website and install the driver. See:#Method_1._Driver_installation
- Make sure the hardware connection is correct and connects fine.
- Make sure you've written the image to your SD card using the software File:Win32DiskImager.zip rather than just copy and paste.
- When the Raspberry Pi starts normally, the PWR light is always on and the ACT light is blinking. If you find that both lights are always on, it may be that the TF card failed to burn the image or the TF card is in poor contact with the Raspberry Pi.
- It is strongly recommended to use a stand-alone 5V/3A power adapter because the USB port of PC might not have enough power to support the Pi and LCD.
|
|