Revision as of 15:24, 22 March 2021 by Admin(talk | contribs)(Created page with " {{FAQ|Notices of flexible e-Paper | *Note that you cannot bend the IC part, only the display area can be bent(>60°). '''Area marked in red cannot be bent.''' File:Flexible...")
Note that you cannot bend the IC part, only the display area can be bent(>60°). Area marked in red cannot be bent.
The circuity area on the corners of e-Paper cannot be bent too much times, please be careful. Recommend you to use Vcacuum Pen or stick it by sticker when picking it up
Please make sure there are not particulate matters on both sides of the e-paper panel. You can only bend the flexible e-paper forward and backward, but not in left and right direction.
The flexible e-Paper is covered by hot melt film, the penal should not touch sharp objects, otherwise, it may be damaged
The object temperature cannot reach 70°C, otherwise, e-Paper will be damaged
If you want to test the bending of flexible e-Paper， you can make a fan-shaped mold whose central angle is 60°and radius is about 5cm
