Search results
From Diustou Wiki
Page title matches
- ...on S1, and the onboard LED light will turn on; release the button, and the LED will turn off. *[[File:实验四：按键控制LED实验_接线.png|600px]]5 KB (794 words) - 13:59, 11 February 2025
- int red = 3; //select the pin for the red LED int green = 5; // select the pin for the blue LED3 KB (415 words) - 13:56, 11 February 2025
- * Be mindful of the LED orientation. If the display is abnormal, please reverse the insertion direc byte b1[8]= {0x00,0x00,0x00,0x00,0x18,0x3C,0x18,0x3C};//8x8 LED dot matrix pattern generated by software4 KB (623 words) - 17:31, 12 February 2025
- |categories={{Category|LED}} {{Category|LED}}1 KB (198 words) - 18:00, 24 January 2025
- 7 KB (1,031 words) - 09:25, 23 March 2021
- 864 bytes (106 words) - 16:38, 22 March 2021
- 705 bytes (85 words) - 09:25, 23 March 2021
Page text matches
- 9 KB (1,169 words) - 17:40, 20 February 2025
- 1 KB (205 words) - 15:33, 22 March 2021
- 1 KB (158 words) - 11:27, 22 January 2025
- *LED indicators:3 KB (423 words) - 18:03, 23 March 2021
- ...ection: connect the "USB to UART" port to your PC with a USB cable and the LED will be turned on. Then install the [[:File:CP210x_USB_TO_UART.zip|CP2102 d # Attach USB devices to the USB1~USB4 ports and the corresponding LED will be turned on to indicate working state.2 KB (298 words) - 09:48, 22 March 2021
- 3 KB (432 words) - 14:57, 14 January 2025
- * Onboard dual-color LED indicators for indicating the transmission and reception status of circuit * Onboard five LED indicators for indicating the transmission and reception status of circuit5 KB (656 words) - 17:06, 5 February 2025
- * Onboard five LED indicators for indicating the transmission and reception status of circuit3 KB (449 words) - 17:08, 5 February 2025
- *Onboard RGB tri-color LED indicator (located on the side of the USB interface) to indicate the sendin **Green LED: Flashes when data is received on the USB side.6 KB (834 words) - 17:04, 5 February 2025
- * LED Indicators: The board features one power indicator and four status indicato10 KB (1,661 words) - 17:09, 5 February 2025
- *Equipped with five LED indicators to show the sending and receiving status of the circuit signals.6 KB (906 words) - 17:03, 5 February 2025
- 15 KB (2,152 words) - 17:56, 20 February 2025
- *Dual LED indicators to display the system's working status.7 KB (1,218 words) - 17:51, 6 February 2025
- 21 KB (3,280 words) - 15:43, 6 February 2025
- * Onboard two LED indicators for indicating the transmission and reception status of circuit * Onboard three LED indicators for indicating the transmission and reception status of circuit8 KB (1,159 words) - 17:05, 5 February 2025
- * Onboard three LED indicators for indicating the transmission and reception status of circuit4 KB (486 words) - 17:08, 5 February 2025
- * The board features two LED indicators to indicate the circuit signal operating status. ...s USB signal reception, i.e., when the signal flow is USB -> 485/422, this LED blinks.8 KB (1,168 words) - 17:05, 5 February 2025
- * The board features three LED indicators to indicate the transmit-receive status of the circuit signals.6 KB (813 words) - 17:07, 5 February 2025
- * Onboard four LED indicators for indicating the transmission and reception status of circuit * Onboard five LED indicators for indicating the transmission and reception status of circuit5 KB (656 words) - 17:06, 5 February 2025
- * Onboard five LED indicators for indicating the transmission and reception status of circuit3 KB (466 words) - 17:08, 5 February 2025
